Latch
Quarter-turn latch 05561
Characteristics Type quarter-turn Material steel, zinc, brass Other characteristics rotary, compact Description Quarter-turn locks compact Material: Housing and actuator die-cast zinc. Nut brass. O-ring NBR, flat seal CR. Tongue steel. Version: Housing and actuator, chromed or black powder-coated. Nut and tongue, galvanised. Note: This quarter-turn lock is vibration-resistant through a detent mechanism in the end […]
Compression latch 05575
Characteristics Type compression, quarter-turn Other characteristics adjustable Description Compression latches with adjustable tongue height Material: Housing, actuator and nut die-cast zinc. Flat seal CR. Tongue steel. Version: Housing and actuator chromed. Nut and tongue galvanised. Note: Compression quarter-turn locks are primarily used for doors and housings that require a higher pressure force on the seal. […]
Cam latch E3-11-15
Characteristics Type cam, compression Material zinc alloy Description Southco’s VISE ACTION® Compression latches provide mechanical advantage, ensuring tight, robust vibration resistant door closure to seal out water and dust in the most strenuous applications. The smooth operation of the VISE ACTION® design aligns the cam behind the frame, then draws it straight up tight to […]
Ball bearing latch 03075-10
Characteristics Type ball bearing Material steel, stainless steel, plastic Applications sliding door, swing door, for access doors Description Ball catch Material: Polyamide fibreglass reinforced. Ball pins, steel or stainless steel 1.4301. Version: black. Note: Quick lock for swing and sliding doors. The elongated holes enable flexible positioning on aluminium profiles and panel elements.
Compression latch E3-VISE ACTION®
Characteristics Type compression Material stainless steel Other characteristics adjustable Description Southco’s VISE ACTION® Compression latches provide mechanical advantage, ensuring tight, robust vibration resistant door closure to seal out water and dust in the most strenuous applications. The smooth operation of the VISE ACTION® design aligns the cam behind the frame, then draws it straight up […]
Cam latch E3-15-15
Characteristics Type cam, compression Material zinc alloy Description Southco’s VISE ACTION® Compression latches provide mechanical advantage, ensuring tight, robust vibration resistant door closure to seal out water and dust in the most strenuous applications. The smooth operation of the VISE ACTION® design aligns the cam behind the frame, then draws it straight up tight to […]
Hygienic latch GN 1150
Characteristics Type quarter-turn Material stainless steel Other characteristics hygienic Description Stainless steel latches GN 1150 are intended for use in hygienic areas and meet hygiene requirements on the operating side (front hygiene). The locking mechanism is protected by two seals. At the same time, the high surface quality (Ra < 0.8 µm) and dead-space-free mounting […]
Key lock latch GN 115.7
Characteristics Type key lock, cam Material stainless steel Other characteristics rotary Description Latches with cabinet “U” handles GN 115.7 are used when the application requires both a locking mechanism and a handle. A rotary movement limited to 90°, e.g. of the triangular spindle of type DK, shifts the key-bolt behind the door frame, with the […]
Cam latch CQT.AE-V0
Characteristics Type cam, lock Material steel, polyamide Description MATERIAL Stator, rotor, closing lever and nut (M22x1.5) in glass-fibre reinforced polyamide based (PA) technopolymer certified self-extinguish UL-94 V0, black colour, matte finish. PACKING RING SBR rubber. INTERNAL TOOTHED WASHER AISI 304 stainless steel SELF-TAPPING SCREW AISI 304 stainless steel KEY Polyamide based (PA) technopolymer. ROTATION 90°. […]
Lever-operated latch GN 8330
Characteristics Type lever-operated Material steel, stainless steel Description The outstanding features of hook clamps GN 8330 are superior functionality and design. The integrated spring mechanism holds the locking lever and the clamping hook in the open position and allows effortless operation. Once the dead center is exceeded, the elasticity of the sheet metal parts will […]