plastic
Corner hinge HIN04 series
Characteristics Type corner Material plastic, thermoplastic Installation screw-in Opening angle 150° Applications door Other characteristics rotating Length 51 mm(2.008 in) Width 57 mm(2.244 in) Thickness 18 mm(0.709 in) Torque 1.2 Nm(0.89 ft.lb) Description These lightweight and strong Detent Plastic Hinges (also known as Detent Hinges, Hinges with Detent, Position Control Hinges) are made from a […]
Edge-mounted hinge 1287
Characteristics Type edge-mounted Material plastic Installation screw-in Opening angle 180° Length 48 mm(1.89 in) Width 48 mm(1.89 in) Thickness 20 mm(0.787 in) Description Black door hinges for external fastening Use: to fasten the hinge to a tube with a thickness of less than 2 mm. 180° opening. Material polyamide hinge, pin in AISI 303 stainless […]
Vent screw MIV-04B-IH
Characteristics Applications vent Head cylindrical head Drive type Allen Materials plastic Description M4x0.7 Venting Element,Screw In Vents, Pressure Release Vavle,Waterproof Venting Plug, Breather Plug, Battery Pack Vents . etc The new design tiny venting screw (pressure release elements) with an Inner Hexagon Head. 1. Easy for mass assembly or automotion assembly. 2. IP66,IP67, IP68, IP69K […]
Corner hinge C/A
Characteristics Type corner Material plastic Installation screw-in Opening angle 180° Other characteristics reinforced Length Max.: 97.9 mm(3.854 in) Min.: 32 mm(1.26 in) Width Max.: 98 mm(3.858 in) Min.: 32 mm(1.26 in) Thickness Max.: 37 mm(1.457 in) Min.: 12.5 mm(0.492 in) Description The GAMM nylon plastic hinges are designed to deliver reliable performance for a myriad of applications. The hinges are manufactured […]
Pivot hinge CFT series
Characteristics Type pivot Material plastic Installation screw-in Opening angle 200° Other characteristics rotating, reinforced Length Max.: 65 mm(2.559 in) Min.: 39.5 mm(1.555 in) Thickness Max.: 21.5 mm(0.846 in) Min.: 13 mm(0.512 in) Description MATERIAL Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. ROTATING PIN Acetal based (POM) technopolymer, black colour. SCREW-COVERS Polyester based (PBT) technopolymer, black colour, […]
Corner hinge K0580 series
Characteristics Type corner, lift-off Material plastic, stainless steel, aluminum Installation screw-in Opening angle 180° Other characteristics with guide Length Max.: 115 mm(4.528 in) Min.: 52 mm(2.047 in) Width 48 mm(1.89 in) Thickness 9 mm(0.354 in) Description Material: Die-cast aluminium. Hinge pin stainless steel.Version:Hinge silver powder coated. Axle bright. Note: Hinges for panel elements and aluminium profiles, non […]
Ball bearing latch 3842524986
Characteristics Type ball bearing Material plastic Other characteristics safety Description Ball catch Ball catch for doors and flaps For sliding and swing doors For doors with or without frames Elongated hole to adjust for differing spacing Suitable for use under clean room conditions Product attributes – Profile slot – 6, 8, 10 ESD – yes […]
Push-to-close latch 1265
Characteristics Type push-to-close Material plastic Applications sliding door Description Use: for door locking. Material latch in polyacetal.
Push-to-close latch 1264
Characteristics Type push-to-close Material plastic Applications swing door Description Use: to lock swing doors with minimal protrusion and pull opening. Material black reinforced polyamide latch and striker plate. Characteristics: if using this latch, you will need to fit a handle on the door.
Stainless steel latch 2544
Characteristics Material stainless steel Description Use: suitable for highly aggressive environments. Material AISI 316 stainless steel, spring in stainless steel for springs. State of supply State of supply: latch preassembled with spring, striker plate (see table)